Surface Fixed Bell Lyre
Installation Instructions

Install Instrument with 1m free space (from widest point) around it.
1. Attach Surface Fixing posts to legs (See Surface Fix Post Installation Sheet)
2.Locate Plate in desired location and mark holes to fix to desired surface.
3. Fix Surface Plate to level surface using Coachscrews, Rawlbolts, chemical anchors or similar as deemed appropriate by Installer. (It is your responsibility to ensure t hat t he existing surface is suitable to receive the appropriate fixing)
4. Make sure all fixings are covered and secure using cover caps provided



Instrument Components:

M6x20 Security Screw x4
M6 Saddle Strap x2

Pair Small Red Beaters x1

Ground Fix Components:
2 Part Cover Cap x4
M10x70 Security Screw x1
M10 Barrel Nut x1


Surface Fix Post Installation
Locate the Surface fix Plate into the leg of the instrument.
Fix instrument to Surface fix plate using MlO bolt and Barrel Nut and use thread locking solution to prevent fixings working loose.
Fix Surface Plate to the ground surface Ground Anchors Not provided cover fixings with caps provided.

Ground Anchors not supplied.
Caution: Bell Lyre surface can get hot in direct sunlight , if possible install in shaded areas.