Percussion Play: Outdoor Musical Instruments
Installation Instructions

Surface Fixed Calypso Chimes
Page 1 of 4

Instrument Components:

M6x20 Security Screw x4
M6 Saddle Strap x1
M6 Square Nut x2
Beater Holder x1
Single Small Red Beaters x1

Surface Fix Components:

M10x70 Security Screw x1
M10 Barrel Nut x1

Metric Conversion
1510mm/59"
1.5m/59"

Made in Britain
BS EN 1176

1. Instrument will arrive on site fully assembled (1.1) (See Assembly Guide).
2. Attach Surface Fixing posts to legs (1.2) (See Ground Fix Post Installation Sheet).
3. Locate Plate in desired location and mark holes to fix to desired surface.
4. Fix to Surfacce using recommended ground anchors (not supplied).
5. Make sure all fixings are covered and secure using cover caps provided.
6. Attach the holder, beater and the saddle strap on side of the post (1.3).

Install instrument with 1.5m free space (from widest point) around it.

Spares available from percussionplay.com or from your local distributor.

10Kg

Percussion Play: Outdoor Musical Instruments
Assembly Guide PPCALQU

Surface Fixed Calypso Chimes
Page 2 of 4

Instrument Components:

M6x20 Security Screw x4
M6 Saddle Strap x1
M6 Square Nut x2
Beater Holder x1
Single Small Red Beaters x1

Surface Fix Components:

M10x70 Security Screw x1
M10 Barrel Nut x1

Components List:

2 Part Cover Cap x4
Saddle Strap x2
M6x20 Pin torx x4
M10x70 Pin torx x1
M10 Barrel Nut Pin torx x1
M6 Square Nut x2
Beater holder x1

Tools:

TX 30 Driver Bit x1
TX 45 Driver Bit x1

Instrument Components:

M6x20 Security Screw x4
M6 Saddle Strap x1
M6 Square Nut x2
Beater Holder x1

600mm min spacing

Thread Lock Solution required (not supplied).
10Kg

Spares available from www.percussionplay.com or from your local distributor.
Percussion Play: Outdoor Musical Instruments
Assembly Guide PPCALQU

Surface Fixed Calypso Chimes
Page 3 of 4

Instrument Components:

M6x20 Security Screw x4
M6 Saddle Strap x1
M6 Square Nut x2
Beater Holder x1
Single Small Red Beaters x1

Surface Fix Components:

M10x70 Security Screw x1
M10 Barrel Nut x1

Diatonic Set of 8

1510
600
1451
600
1395
600
1366
600
1314
600
1265
600
1217
600
1195

Pentatonic Set of 6

1510
600
1451
600
1395
600
1314
600
1265
600
1195

Pentatonic Set of 4

1510
600
1395
600
1314
600
1195

Percussion Play: Outdoor Musical Instruments
Ground Fix Post Installation

Surface Fixed Calypso Chimes
Page 4 of 4

1. Locate the Surface Fix Plate into the leg of the instrument.
2. Fix instrument to Surface Fix Plate using M10 bolt and Barrel Nut and use thread locking solution to prevent fixings working loose. Thread Lock Solution required (not supplied).
3. Fix Surface Plate to the ground surface (ground anchors not provided). Cover fixings with caps provided.

178
178
178
178
16