COMPONENTS LIST:
Saddle Strap X2
M10x50 Pin torx X4
M6x20 Pin torx X4
M10x70 Pin torx X2
M10 Barrel Nut Pin torx X2
Surface Fixed
Assembly Guide PPFREC
16 Kg
BS EN 1176
Freechimes
Alto/ Soprano
Page 2 of 3
Pair Small Beaters X1
TX 30 Driver Bit
x1 TX 45 Driver Bit
x2 Tools:
Components:
M6x20mm
Secure Screw
X4
Eye Straps
X2
M8x40mm
Secure Screw
X4
Surface Fix Components:
Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
M10x70 Security Screw
x2 M10 Barrel Nut
x2 2 Part Cover Cap
x8 Spares available from percussionplay.com or from your local distributor
M8 X 40 Pin Torx
X4

Surface Fixed
Freechimes
Alto/ Soprano
Page 1 of 3
Components:
1
. Carefully lay 2 x legs on a level surface and check distance between legs is equal
. Line up pre drilled holes in the backboards with the holes in legs and ensure the instrument is aligned square with the legs. Fix in place using M8x40mm
screw
s supplied (see installation guide)
Installation Instructions
6
. Beaters can be fixed to Steel posts with fixings provided
1260m
m
Ground Surface
Pair Small Beaters X1
16 Kg
BS EN 1176
1.5m
Weight of heaviest part 8.35kg
(
Freechimes
)
1.5m
Install Instrument with 1.5m free space (from widest point) around it.
M6x20mm
Secure Screw
X4
Eye Straps
X2
M8x40mm
Secure Screw
X4
Surface Fix Components:
Metric Conversion
:
1260mm
/ 49 39/64
โ€
1.5m/ 59โ€
2
. Attach Surface Fixing posts to legs
(See Surface Fix Post Installation Sheet)
4.
Fix Surface Plate to level surface using Coachscrews
, Rawlbolts
, chemical anchors or similar as deemed appropriate by Installer.
(It is your responsibility to ensure that the existing surface is suitable to receive
the appropriate fixing)
3
.
Locate Instrument in desired location and mark holes to fix to desired surface
.
5
. Make sure all fixings are covered and secure using cover caps provided
M10x70 Security Screw
x2 M10 Barrel Nut
x2 2 Part Cover Cap
x8 Spares available from percussionplay.com or from your local distributor

Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x2 M10x70 Security Screw
x2 Components:
Ground fix tube protrudes 300mm from ground surface that inserts into the base of the chime post
TX 45 Driver Bit
Tools:
x2 BS EN 1176
Thread Lock Solution Required (Not Supplied)
Freechimes
Alto/ Soprano
Page 3 of 3
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
1
2
3
Thread Lock Solution Required (Not Supplied)
2 Part Cover Cap
x8