Surface Fixed
Installation Instructions
Instrument Components:
Pair Large Red
Beaters X2
48 Kg
Grand Marimba
Page 1 of 3
BS EN 1176
M10x30 Security Screw
x4 Weight of heaviest part 40
kg
(Grand Marimba)
850mm
to
note
centr
e
Install Instrument with 1.5m free space (from widest point) around it.
1.5m
1.5m
1.5m
1.5m
1
. Attach the steel legs to each end of the instrument with the M10x30 security screws.
(See Assembly Guide)
10x3/4
Secure Screw
X4
Metric Conversion:
250mm/ 10”
400mm/ 16”
550mm/ 22

850mm/ 33

1.5m/ 59”
Spares available from percussionplay.com or from your local distributor
(1.2)
6
. Attach the 2 pairs of beater to the under side of the instrument
2
. Attach Surface Fixing posts to legs
(1.2) (See Ground Fix Post Installation Sheet)
4
. Fix to Surface using recommended ground anchors not supplied
3
.
Locate Plate in desired location and mark holes to fix to desired surface
.
5
. Make sure all fixings are covered and secure using cover caps provided
Surface Fix Components:
M10x70 Security Screw
x4 M10 Barrel Nut
x4 2 Part Cover Cap
x16
Surface Fixed
Assembly Guide PPGMAR
10x3/4
Secure Screw
X4
Instrument Components:
Pair Large Red
Beaters X2
48 Kg
Grand Marimba
Page 2 of 3
BS EN 1176
M10x30 Security Screw
x4 TX 25 Driver Bit
x1 TX 45 Driver Bit
x2 Tools:
Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
Spares available from percussionplay.com or from your local distributor
PPGRAM FRONT
PPGRAM SIDE
COMPONENTS LIST:
10x3/4 Pin torx Screw X4
M10x30 Pin torx X4
Saddle Strap X2
saddle straps for beaters attach to
underside of Grand Marimba body
M10x70 Pin torx X4
M10 Barrel Nut Pin torx X4
Surface Fix Components:
M10x70 Security Screw
x4 M10 Barrel Nut
x4 2 Part Cover Cap
x16
Surface Fixed
Surface Fix Post Installation
M10 Barrel Nut
x4 M10x70 Security Screw
x4 Components:
Ground fix tube protrudes 300mm from ground surface that inserts into the base of the chime post
TX 45 Driver Bit
Tools:
x2 BS EN 1176
Thread Lock Solution Required (Not Supplied)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
1
2
3
Thread Lock Solution Required (Not Supplied)
2 Part Cover Cap
x16 Grand Marimba
Page 3 of 3