Harmony Flowers
Ground Fixed Installation Instructions
Page 1 of 3
1. Unpack ground fixing legs 3no.
2. Lay packaging out on floor or assemble on non-abrasive surface to prevent marking of polished stainless steel.
3. Align holes on legs (opposite end to polished domes) and secure in place using 3no. M10 x 200mm threaded bar and 6no. M10 nuts provided. Tools required 2no. 17mm metric spanner/wrench (11/16 inch or alternatively using adjustable wrench)
4. Invert assembled frame so flowers are at the top.
5. Excavate a hole for the frame 250mm diameter by 450 deep in desired location upon decision from customer. (See Ground Fix Post Installation)
6. Locate (lower) frame into the hole making sure that the flowers are level and upright.
7. Once happy with the location of the Flowers, fill hole using rapid hardening concrete. Be sure to compact concrete around legs and leave to dry according to manufactures guidelines.
N.B Install Instrument with 1.5m free space (from widest point around it)

Instrument Components:
Small Beaters X3

Ground Fix Components:
M10x200 Threaded barx3
M10 BZP Nut x6

BS EN 1176
Spares available from percussionplay.com or from your local distributor
Instrument Weight – 15Kg
Metric Conversion: 400mm/ 16” 1100mm/ ” 1.5m/ 59”
Harmony Flowers
Ground Fixed Installation Instructions
Page 2 of 3
Assembly Guide PPHARMF
Instrument Components:
Small Beaters X3
Ground Fix Components:
M10x200 Threaded barx3
M10 BZP Nut x6

BS EN 1176
Spares available from percussionplay.com or from your local distributor
Instrument Weight – 15Kg

Harmony Flowers
Ground Fixed Installation Instructions
Page 3 of 3

1. Insert M10x 200 Threaded bar into pre drilled holes in Frame of Flow
2. Excavate a hole with a 250mm diameter tapering down to 350mm diameter and 450mm depth
3. Compact base of hole with 50mm of aggregate. Lower ground Fix post attached to instrument into hole (check instrument straight and level before filling with concrete)
4. Fill hole with fast drying concrete to manufacturers specifications.

N.B If Flower needs to be positioned lower a deeper hole can be excavated.
Foundations should not present a hazard. These foundations are recommended as a guide, for more information on foundation details for various surface see Part 1 of BS EN 1176.

Instrument Components:
Small Beaters X3
Ground Fix Components:
M10x200 Threaded barx3
M10 BZP Nut x6

BS EN 1176
Spares available from percussionplay.com or from your local distributor