Music Book Installation Instructions

1. Attach the steel legs to the base of the instrument with the MS Nyloc Nuts and 2 part security caps. (1.1) (See Assembly Guide)
2. Attach Surface Fixing posts to legs (1.2) (See Ground Fix Post Installation Sheet)
3. Locate Plate in desired location and mark holes to fix to desired surface
4. Fix to Surface using recommended ground anchors not supplied
5. Make sure all fixings are covered and secure using cover caps provided

Instrument Components:
Music Book
M8 Nyloc Nut x8
2 Part Cover Cap M8 x4
M10x200 Bolt x2
M10 Nut x4
M10 Barrel Nut x1
M10x70 Security Screw x1

Assembly Guide: Components List

2 Part Cover Cap M8 X4
M8 Nyloc nut X4
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
1. Locate the Surface fix Plate into the leg of the instrument .
2. Fix instrument to Surface fix plate using M10 bolt and Barrel Nut and use thread locking solution to prevent fixings working loose.
3. Fix Surface Plate to the ground surface Ground Anchors Not provided cover fixings with caps provided