Surface Fixed Rainbow Chime Post
1. Instrument will arrive on site fully assembled. (1.1) (See Assembly Guide)
2. Attach Surface Fixing posts to legs(1.2) (See Ground Fix Post Installation Sheet)
3. Locate Plate in desired location and mark holes to fix to desired surface.
4. Fix to Surface using recommended ground anchors not supplied
5. Make sure all fixings are covered and secure using cover caps provided
6. Attach the 1 pair of beater to the saddle strap on each side of the post. ( 1.3)
Rainbow Chime Post
M6x20 Security Screw x4
M6 Saddle Strap x2
Surface Fix Components
M10x70 Security Screw x1
M10 Barrel Nut x1
Pair Small Red Beaters x1
Assembly Guide: Components List
2 Part Cover Cap X4
Saddle St rap X2
M6x20 Pin torx X4
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
TX30 Driver Bit x1
TX45 Driver Bit x2
Ground Fix Post Installation
1. Locate the Surface fix Plate into the leg of the instrument.
2. Fix instrument to Surface fix plate using M10 bolt and Barrel Nut and use thread locking solution to prevent fixings working loose.
3. Fix Surface Plate to the ground surface Ground Anchors Not provided cover fixings with caps provided.