Surface Fixed
Ground Surface
Installation Instructions (1.1)
Surface Fix Components:
Instrument Components:
17 Kg
Install Instrument with 1.5m free space (from widest point) around it.
Pair Small Red
Beaters X1
Weight of heaviest part 7.5kg
BS EN 1176
Metric Conversion:
1080mm/ 42.5”
1.5m/ 59”
Spares available from percussionplay.com or from your local distributor
(1.2)
1. Instrument will arrive on site fully assembled. (1.1) (See Assembly Guide)
2. Attach Surface Fixing posts to legs
3.Locate Plate in desired location and mark holes to fix to desired surface.
4. Fix to Surface using recommended ground anchors not supplied
5. Make sure all fixings are covered and secure using cover caps provided
6. Attach the 1 of the beaters to each of the saddle strap on the hex frame. (1.3)

(1.2) (See Surface Fix Post Installation Sheet)
M10 Barrel Nut
x1 M10x70 Security Screw
x1 M6x20 Security Screw
x4 M6 Saddle Strap
x2 Petal Drum

Page 1 of 3
1080mm


Surface Fixed
Assembly Guide PPPETA
(1.1)
Surface Fix Components:
17 Kg
Pair Small Black
Beaters X1
BS EN 1176
Thread Lock Solution Required (Not Supplied)
Instrument Components:
Spares available from percussionplay.com or from your local distributor
M10 Barrel Nut
x1 M10x70 Security Screw
x1 TX 45 Driver Bit
Tools:
TX 30 Driver Bit
x2 x1 M6x20 Security Screw
x4 M6 Saddle Strap
x2 Petal Drum

Page 2 of 3
COMPONENTS LIST:
2 Part Cover Cap X8
Saddle Strap X2
M6x20 Pin torx X4
M8X25 Pin trox X3
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
Thread Lock Solution Required (Not Supplied)
Install
3XPU Inserts into each arm before installing petal section

Surface Fixed
Surface Fix Post Installation
BS EN 1176
Components:
M10 Barrel Nut
x1 M10x70 Security Screw
x1 Thread Lock Solution Required (Not Supplied)
(1.1)
Locate the Surface fix Plate into the leg of the instrument.
Fix instrument to Surface fix plate using M10 bolt and Barrel Nut and use thread locking solution to prevent fixings working
loose.
Fix Surface Plate to the ground surface
Ground Anchors Not provided
Cover fixings with caps provided
Thread Lock Solution Required (Not Supplied)
Petal Drum
Page 3 of 3