Surface Fixed
2
. Attach Surface Fixing posts to legs
(1.2) (See Ground Fix Post Installation Sheet)
1
. Attach the steel leg to each of the congas with the M10x50 security screws, square washers and PU mounts. (1.1) (See Assembly Guide)
Ground Surface
Installation Instructions
(1.1)
Instrument Components:
Surface Fix Components:
Played with hands
BS EN 1176
15 Kg
M10 Barrel Nut
x1 M10x70 Security Screw
x1
Ground Anchors not supplied
4
. Fix to Surface using recommended ground anchors not supplied
3
.
Locate Plate in desired location and mark holes to fix to desired surface
.
5
. Make sure all fixings are covered and secure using cover caps provided
2 Part Cover Cap
x4 (1.2)
Spares available from percussionplay.com or from your local distributor
850mm from Plate
Metric Conversion:
250mm/ 10โ€
850mm/ 33โ€
1.5m/ 59โ€
M10x50 Security Screw
x6
M10x50x3 Square washer
x6 PU 200 Mount
PU 250 Mount
x4 x2 Rainbow Bongos
1 of 2
Install Instrument with 1.5m free space (from widest point) around it.
1.5m
1.5m
Weight of heaviest part 7 kg
(bongos)

M10x50 Pin torx X6
M10x50x3 square washer X6
COMPONENTS LIST:
HDPE MOUNT 200 X4
HDPE MOUNT 250 X2
2 Part Cover Cap X4
PPRTBON FRONT
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
Surface Fixed
Assembly Guide PPCONG
(1.1)
Surface Fix Components:
Played with hands
TX 45 Driver Bit
Tools:
x2 BS EN 1176
15 Kg
M10 Barrel Nut
x1 M10x70 Security Screw
x1
Ground Anchors not supplied
2 Part Cover Cap
x4 Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
Spares available from percussionplay.com or from your local distributor
Instrument Components:
M10x50 Security Screw
x6
M10x50x3 Square washer
x6 PU 200 Mount
x4 x2 Rainbow Bongos
2 of 2
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided