1
. Attach the steel legs to the base of the instrument with the M8 Nyloc
Nuts and 2 part security caps. (1.1) (See Assembly Guide)
Surface Fixed
Installation Instructions
(1.1)
(1.2)
Instrument Components:
6
. Attach the 1 pair of beater to the saddle strap on the leg. (1.3)
Surface Fix Components:
(1.3)
Pair Small Red
Beaters X1
BS EN 1176
Metric Conversion:
850mm/ 33”
1.5m/ 59”
M8 Nyloc
Nut
x4 M6x20 Security Screw
x2 M6 Saddle Strap
x1 2 Part Cover Cap x4 M10 Barrel Nut
x1 M10x70 Security Screw
x1
Ground Anchors not supplied
2 Part Cover Cap
x4 2
. Attach Surface Fixing posts to legs
(1.2) (See Ground Fix Post Installation Sheet)
4
. Fix to Surface using recommended ground anchors not supplied
3
.
Locate Plate in desired location and mark holes to fix to desired surface
.
5
. Make sure all fixings are covered and secure using cover caps provided
Spares available from percussionplay.com or from your local distributor
Ground Surface
850mm from plate
Install Instrument with 1.5m free space (from widest point) around it.
1.5m
1.5m
Weight of heaviest part 7kg
(Metallophone)
19.5 Kg
Rainbow Trio Metallophone
Page 1 of 3

PPRMET SIDE
COMPONENTS LIST:
2 Part Cover Cap X8
Saddle Strap X1
M6x20 Pin torx X2
PPRMET FRONT
M8x20 Pin torx X4
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
Surface Fixed
Assembly Guide PPCAVA
(1.1)
Surface Fix Components:
Pair Small Red
Beaters X1
BS EN 1176
Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
Instrument Components:
M8 Nyloc
Nut
x4 M6x20 Security Screw
x2 M6 Saddle Strap
x1 2 Part Cover Cap x4 TX 30 Driver Bit
x1 TX 40 Driver Bit
x1 Tools:
M10 Barrel Nut
x1 M10x70 Security Screw
x1
Ground Anchors not supplied
2 Part Cover Cap
x4 Spares available from percussionplay.com or from your local distributor
19.5 Kg
Rainbow Trio Metallophone
Page 2 of 3

Surface Fixed
Components:
Surface Fix Post Installation
BS EN 1176
Metric Conversion:
50mm/ 2”
250mm/ 10”
350mm/ 14”
400mm/ 16”
450mm/ 18”
TX 45 Driver Bit
Tools:
x2 (1.1)
Locate the Surface fix
Plate into the leg of the
instrument.
Fix instrument to Surface
fix plate using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Fix Surface Plate to the
ground surface Ground
Anchors Not provided
cover fixings with caps
provided
1
2
3
Thread Lock Solution Required (Not Supplied)
M10 Barrel Nut
x1
M10x70 Security Screw
x1 Thread Lock Solution Required (Not Supplied)
2 Part Cover Cap
x4 Rainbow Trio Metallophone
Page 3 of 3