Wall Fixed Sansa Rimba
Installation Instructions:

1. Attach the steel leg to t he base of t he instrument with the M8 Nyloc Nuts and 2 part security caps. (1.1) (See Assembly Guide)
2. Attach Wall Fixing posts to legs (1.2) (See Ground Fix Post Installation Sheet)
3. Mark hole locations (X4) using the pre drilled holes in square plate.
4. Drill hole locations (X4) according to your chosen fixings (frame fixings, wall bolts or chemical anchors) depending of the structure of the wall.
(Not Supplied)
5. Fix through Plate with suitable fixings (not supplied) in correct orientation and height for intended Key stage. Cover Fixings with 2 Part Caps supplied
6. Attach the 1 pair of beater to the saddle strap on the leg. (1.3).

Instrument Components:
M8 Nyloc Nut x4
M6x20 Security Screw x2
2 Part Cover Cap x4
M6 Saddle Strap x1



Assembly Guide: Components List

2 Part Cover Cap X8
M8 Nyloc nut X4
Saddle Strap X1
M6x20 Pin torx X2

Tools: TX30 Driver Bit x1