Surface Fixed Tubular Bells: Horseshoe Base
Installation Instructions:

1. Locate Base in desired location before attaching the bells. Fix lower sections to surface using pre drilled holes provided. (Surface Anchors Not supplied) Recommended M10 Female Rawl Bolts or chemical anchors
2. Assemble Upper 3 Base sections using tv18 x 16 mm CSK screws provided (1.1)
3. Using the M10x40 screw and Barrel Nuts to attach each of the 9 legs to the base (1.2)
4. Make sure that all fixings are tightly secured and thread locking solution used if required.

Instrument Components:
Tubular Bells (pre-assembled)
Pair Large Red Beaters x1
Surface Fix Components:
M10x40 Security Screw x9
M10 Barrel Nut x9
M8x16 CSK Security Screw x34

Components List:
M10 Barrel Nut Pin torx x9
M8x16 CSK SCrew x34
M10x40 Pin torx x9

Tools:
TX40 Driver Bit x1
TX45 Driver Bit x2

Assembly Guide (1/2)

1. Mount this section of each base to the deck Deck Anchors Not provided using pre drilled holes
2. Insert instrument plates with stanchions and attach with CSK M8x16mm Screws provided
Assembly Guide (2/2)

3. Join the upper and lower base sections with CSK M8x16mm Screws provided
4. Lower I nstrument over t he stanchions and attach with fixings provided (see surface fix installation instructions)