Surface Fixed Tubular Bells (Set 7)
1. Attach Surface Fixing plates to each of t he 9 legs (1.2).
2. Locate each chime in desired location and mark holes to fix to desired surface.
3. Fix Surface Plate to level surface using Coachscrews, Rawlbolts, chemical anchors or similar as deemed appropriate by Installer. (It is your responsibility to ensure that the existing surface is suitable to receive the appropriate fixing).
4. Make sure all fixings are covered and secure using cover caps provided.
Tubular Bells (pre-assembled)
Pair Large Red Beaters x1
Surface Fix Components:
M10x40 Security Screw x9
M10 Barrel Nut x9
2 Part Cover Cap x36
Surface Fix Plate Installation
1. Locate the Surface fix Plate into the leg of the instrument.
2. Fix instrument to Surface fix plate using MlO bolt and Barrel Nut and use thread locking solution to prevent fixings working loose.
3. Fix Surface Plate to the ground surface Ground Anchors Not provided cover fixings with caps provided.
4. Repeat Parts 1-3 for all 9 legs.