Instrument
Components:
KS1,KS2
KS2 -
850mm Ground Surface
KS1 -
700mm Installation Instructions
14 Kg
4
. Once all mounts are fixed in place attach the notes using M8 Barrel Nuts and Pin torx
bit. 1
. Mark hole positions on wall, then drill to manufacturers specified diameter and depth of M10 rawl
bolt (See Wall Fix installation sheet)
2
. Once holes are drilled insert M10 rawl
bolts into holes and set in place to secure tightly 3
. Attach wall mounts onto rawl
bolts making sure they are tight to the wall and have the large holes to the outside. Use a long tool to tighten further.
1m
Pair Small Red
Beaters X1
Weight of heaviest part 12
kg
(Wall Marimba Notes)
BS EN 1176
Wall Fixed
M8 Barrel Nut
x4 Wall mounts
x4
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Wall Marimba
Page 1 of 3
Wall fixings are not supplied, installer will select suitable method of fixing. Suggested Fixing M10 Rawl
Bolt
Metric Conversion:
700mm/ 28”
850mm/ 33”
1m/ 39”
Spares available from percussionplay.com or from your local distributor

Wall Fixed
Instrument
Components:
Assembly Guide PPWMAR
M8 Barrel Nut
x4 14 Kg
Pair Small Red
Beaters X1
Wall Marimba
Page 2 of 3
TX 40 Driver Bit
x1 Tools:
BS EN 1176
COMPONENTS LIST:
M8 Barrel Nut Pin torx X4
Wall fixings are not supplied, installer will select suitable method of fixing. Suggested Fixing M10 Rawl
Bolt
Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
Thread Lock Solution Required (Not Supplied)
Spares available from percussionplay.com or from your local distributor

Wall Fix Installation
(1.1)
TX 45 Driver Bit
Tools:
x1 BS EN 1176
Wall Fixed
Instrument
Components:
M8 Barrel Nut
x4 Wall Marimba
Page 3 of 3
Wall mounts
x4
1
. Mark hole positions .
2
. Drill holes .
3
. Fit wall mounts .
4
. Attach notes .
Metric Conversion:
1507mm 59 21/64

1492mm/ 58 47/64

1490mm/ 58 21/32

300mm/ 11 13/16

150mm/ 5 29/32

75mm/ 3”
Saddle Straps should be attached to the bottom wall mounts
to
attach the
beater
s